Jaw Crusher Parts Introduce:

Jaw crusher parts include wear parts(spare) and main components(unit).
Mostly, we should buy some more spare wear parts(touch and crush raw material directly on the surface to protect mian units) to extends the useage of crushing machine. You can change the wear parts easily mostly(If you have any problem, feel free to contact us!). We provide jaw crusher wear parts for you with more than 30 years serving experience.
However, if the main components have some problems, you should contact machine manufacturer or professional repair person to have an inspection. We are experts who have 30 years of experiences in developing and supplying Jaw Crusher component units. If you get into this kind of trouble, discribe your machine condition as detail as possible(online chat immediately or leave a message) and we will give you suitable suggestion.

Jaw Crusher Parts List:

1) Flywheel, 2) Rack, 3) Side Fender, 4) Thrust Plate, 5) Lock block 6) Bearing end-shield, 7) Spindle, 8) Jaw Plate, 9) Machine Case and so on.

Jaw Crusher Installation and Maintance:

Jaw Crusher is generally installed above the concrete foundation. Given the weight of a larger crusher, poor working conditions, and the machine in operation again with great force of inertia to promote the foundation and the machine phylogenetic vibration. Based on vibration are directly caused by other machinery and equipment and building structures vibration. Therefore, the basis of crusher must be separated with the plant base. Meanwhile, in order to reduce vibration, the crusher is placed between the foundation and frame pad rubber or timber.

Proper operation is to ensure a continuous work crusher one important factor.
Start crushing machine, it should be starting the first oil pump motor and cooling system, after 3-4 minutes, until the oil pressure and oil flow indicator is normal, and then activate the crusher motor.
After startup, if the crusher is not a normal issue of percussion sound, should stop operation, to identify and eliminate defects, restart the machine.
Breakers must be empty to start, starts after a period of time, in normal operation before starting to mine equipment. Into the crusher to the ore should be gradually increased until the full load operation.
In the machine in operation, should be taken regularly for inspection tours, by seeing, hearing, touch, etc. to observe the work of the various components of breaker condition and bearing temperature.
For large jaw crusher of the sliding bearing, but also should be noted that bearing temperature. When they find out when the bearing temperature is high, do not immediately stop operation, shall promptly take effective measures to reduce the bearing temperature, such as: increased to fuel, forced ventilation or by water cooling.
Breakers stop, you must follow in order to stop the production process. First of all we must stop to mine the ore cavity to be broken after all the discharges, and then stop crusher and conveyor system. When the crusher headway ran only after the cessation of pump motor.

Want Jaw Crusher Spare ?

We are your competent, adaptable partner for the production of jaw crusher spare and crusher parts in large or small quantities. We can deliver parts or assemblies of parts upon request. Our commitment: 1 Team problem solving. 2 On time customer response. 3 Responsive to latest business demands. 4 Continuos improvements of processes, products and customer service. 5 We are open minded and adapt a positive approach.

Haven't find your answer? Dont worry, feel free to contact us for more information.